Bidirectional shaking table tests of a low-cost friction sliding system with flat-inclined surfaces     

Miguel B. Brito  Mitsuyoshi Akiyama  Yoshitaka Ichikawa  Hiroki Yamaguchi  Riki Honda  Naomitsu Ishigaki 《地震工程与结构动力学》2020,49(8):817-837

A novel low-cost friction sliding system for bidirectional excitation is developed to improve the seismic performance of reinforced concrete (RC) bridge piers. The sliding system is a spherical prototype developed by combining a central flat surface with an inclined spherical segment, characterized by stable oscillation and a large reduction in response accelerations on the flat surface. The inclined part provides a restoring force that limits the residual displacements of the system. Conventional steel and concrete are employed to construct a flat-inclined spherical surface atop an RC pier. The seismic forces are dissipated through the frictions generated during the sliding movements; hence, the seismic resilience of bridges can be ensured with a low-cost design solution. The proposed system is fabricated utilizing a mold created by a three-dimensional printer, which facilitates the use of conventional concrete to construct spherical shapes. The concrete surface is lubricated with a resin material to prevent abrasion from multiple input ground motions. To demonstrate the effectiveness of the system, bidirectional shaking table tests are conducted in the longitudinal and transverse directions of a scaled bridge model. The effect of the inclination angle and the flat surface size is investigated. The results demonstrate a large decrease in response acceleration when the system exhibits circular sliding displacement. Furthermore, the inclination angle that generates the smallest residual displacement is identified experimentally.  相似文献   

运用GD-PBIBD编码的矢量空间数据数字指纹算法     

陈金萍  张黎明  蒋美容  王昊 《测绘通报》2020,(8):81

针对矢量空间数据叛逆者追踪难及编码效率低的问题，本文提出了一种运用GD-PBIBD码的指纹算法。首先运用GD-PBIBD构造指纹编码，将待嵌入指纹序列运用Logistic映射置乱，通过D-P算法提取矢量空间数据的特征点，对特征点实施DFT变换得到相位系数和幅度系数；然后运用QIM方法将指纹嵌入DFT变换域的幅度系数上；最后应用DFT逆变换得到含指纹的矢量空间数据。试验选取部分中国路网数据和某区域绿地数据，运用该算法嵌入指纹后，对其进行线性和非线性模拟攻击，成功提取指纹序列，利用汉明距离追踪出合谋者。该算法编码构造简单，在码长一定的情况下，较BIBD码可容纳更多的用户，效率高；算法抗单用户指纹攻击及多重攻击的稳健性较好，也能够抵抗多用户最小值和最大最小值攻击，追踪到所有叛逆者，可用于矢量空间数据版权保护，为矢量空间数据叛逆者追踪提供依据。  相似文献   

基于钻进状态监测的智能工况识别          下载免费PDF全文

范海鹏  吴敏  曹卫华  赖旭芝  陈略峰  陆承达 《探矿工程》2020,47(4):106-113

钻进过程状态监测旨在实时描述钻进工况，判断运行性能优劣程度进行非优追溯，及时指导司钻人员调整作业操作,保证钻进过程安全、高效、稳定开展。钻进工况是钻进系统运行状态的反映，因此开展面向状态监测技术的钻进工况识别研究具有重要的理论和应用价值。本文针对钻进工况识别问题，基于状态监测数据，建立基于支持向量机的钻进工况识别模型，对钻进工况进行识别。综合工况识别结果，对钻进效率进行评估，并对影响钻进效率的因素进行讨论，寻找提升钻进效率的手段。最后，采用钻进现场实钻数据进行仿真实验,验证所提方法的可行性和有效性。  相似文献   

深厚软土场地基岩地震动反演——以天津波为例          下载免费PDF全文

梁建文  张萍  何颖 《世界地震工程》2020,(3):001-11

根据天津波地表加速度记录和相应实测场地钻孔资料，采用等效线性化方法模拟土体非线性，进行了深厚软土场地基岩地震动反演，研究了频率截断对深厚软土场地基岩地震动反演的影响，为天津波地表加速度记录提供了相应的基岩地震动输入。研究表明:不同截断频率情况下，反演得到的基岩地震动峰值和反应谱曲线形状均相差悬殊，但反演后再正演所得到的地面运动与原地表记录相比，加速度时程曲线形状和峰值大小、反应谱曲线形状和峰值大小均非常接近；可根据工程需要对地表加速度记录进行不同频率的截断，反演得到所需强度的基岩地震动。  相似文献   

大兴安岭西侧盆地群推覆构造的地震学证据          下载免费PDF全文

王典  李鹏  单玄龙  鹿琪  刘洋  于涵 《地球物理学报》2019,62(3):1129-1138

推覆构造是一种和油气有关的重要构造形式,主要产出于造山带前陆,是挤压或压缩作用的结果,对油气的生成、储集、运移、圈闭和保存条件都有着重要的影响.研究区从漠河盆地、海拉尔盆地到二连盆地内的中生代推覆构造,组构了大兴安岭西盆地群推覆构造.本文通过对三个盆地五种推覆构造的地震学研究,将其推覆方向归结为两类:第一类由北西向南东推覆,在三个盆地中表现明显;第二类由南东向北西推覆,在海拉尔盆地和二连盆地内有显示.认为第一类推覆作用来源于蒙古—鄂霍茨克洋自西向东的闭合;第二类推覆作用来源于太平洋板块俯冲的远程应力作用.  相似文献   

Experimental investigation on a cabin-suspended catamaran in terms of motion reduction and wave energy harvesting by means of a semi-active motion control system     

《Applied Ocean Research》2019

A novel concept catamaran equipped with a suspended cabin, named Wave Harmonizer Type 4 (WHzer-4), is proposed and evaluated. The mass-spring-mass system is constructed by mounting four sets of suspensions in-between the cabin and the twin-hull. Two sets of dual motor/generators (M/Gs) are attached on the center beam of the cabin's deck fore and aft. Each shaft-end of the dual M/Gs is connected to the twin-hull through a rack-pinion gear unit. In this way the vertical relative motion between the cabin and the twin-hull can be transferred into the rotational motion of the M/Gs, and vice versa. A semi-active motion control system, which contains a proportional-integral (PI) controller, is designed and applied to each of the dual M/Gs for the aim of absorbing wave energy under the condition of suppressing the local vertical velocity of the cabin as much as possible. A 1/5 scale model ship with a length of 1.6 m is built, and a forced-oscillation bench test is implemented to validate the performance of the control system. Then, a series of towing tank tests is carried out in regular head waves. The heave and pitch responses of the cabin, those of the twin-hull and the corresponding wave energy capture width ratio (CWR) at five control scenarios and two reference scenarios are investigated. Discussion on the results of the tank test shows that the motion reduction of the cabin and the wave energy harvesting can be achieved simultaneously at a few wave conditions. However, at other conditions, although noticeable amount of wave energy is harvested, motion reduction of the heave and pitch of the cabin could not be obtained at the same time. It is suggested that varying the gain settings of the PI controllers according to the location of the controllers may improve the effectiveness of the proposed control system.  相似文献   

Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs     

Takeshi Sano  Kazutaka Shirai  Yasumasa Suzui  Yoshikazu Utsumi 《地震工程与结构动力学》2020,49(13):1259-1280

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.  相似文献   

Impact of fractional probability distributions on statistics of hydraulic conductivity,dynamics of groundwater flow and solute transport at a low-permeability site     

Chengpeng Lu  Wei Qin  Ching-Sheng Huang  Yong Zhang  Tema Koketso Ealotswe 《水文研究》2020,34(21):4112-4127

The fractional Brownian motion (fBm) and fractional Lévy motion (fLm) can easily describe the geometry and the statistical structure of hydraulic conductivity (K) for real-world. However, the fBm and fLm models have not been systematically evaluated when building the K field for a low-permeability site. In this study, both the fBm and fLm are used to simulate the low-K field at NingCheGu (NCG), Tianjin, China. Groundwater flow and solute transport are then computed using MODFLOW and MT3DMS, respectively, and the influence of the fBm/fLm models for K on groundwater flow and solute transport is discussed. Results show that the fLm fits better the statistics of the low-K medium than fBm, and the random logarithmic K (LnK) field generated by fLm is more stable because the resultant LnK field captures more of the measured properties at the field site than that generated by fBm. In contrast, the LnK generated by fBm is more likely to form both high-K channels and low-K barriers. The fBm therefore predicts more extreme behaviours in flow and transport, including the preferential flow, low-concentration blocks and solute retention. The overall groundwater renewal period and solute travel time for the fLm simulation are slightly shorter than those for fBm. The impacts of the fLm and fBm models on the statistics of the resultant LnK fields and the dynamics of groundwater flow and solute transport revealed by this study shed light on the selection and evaluation of the fractional probability distribution models in capturing the K fields for low-K media.  相似文献   

Efficient strong motion duration of pulse-like records for nonlinear structural analyses     

Constantinos C. Repapis  Petros P. Mimoglou  Vicky V. Dimakopoulou  Ioannis N. Psycharis  Ioannis M. Taflampas 《地震工程与结构动力学》2020,49(5):479-497

The special interest produced by near-field directivity records and their effect on structural response has given a new significance in the velocity time history, its pulse-like content, and relevant parameters and indices. Recent research has shown that directivity pulses inherent in these records govern the linear and the nonlinear response of a wide range of structures. Based on this observation, it is suggested in this paper that a truncated ground motion, limited to the duration of the predominant velocity pulse, can be efficiently used to predict the structural response, instead of the base motion with the total duration, reducing significantly the required runtimes. The proposed methodology is verified for a series of medium to high rise reinforced concrete buildings, for which nonlinear time-history analyses are performed for a vast suite of pulse-like near-field records applied as base excitations with their total duration and the proposed truncated one. Comparison of the results for the response displacements and forces shows very good agreement, permitting the acceptance of the pulse duration as the efficient strong motion time interval of the original record, which determines the response and, thus, it can be used for nonlinear structural analyses.  相似文献   

Talus slope geomorphology investigated at multiple time scales from high-resolution topographic surveys and historical aerial photographs (Sanetsch Pass,Switzerland)     

Hanne Hendrickx  Lars De Sloover  Cornelis Stal  Reynald Delaloye  Jan Nyssen  Amaury Frankl 《地球表面变化过程与地形》2020,45(14):3653-3669

Talus slopes are common places for debris storage in high-mountain environments and form an important step in the alpine sediment cascade. To understand slope instabilities and sediment transfers, detailed investigations of talus slope geomorphology are needed. Therefore, this study presents a detailed analysis of a talus slope on Col du Sanetsch (Swiss Alps), which is investigated at multiple time scales using high-resolution topographic (HRT) surveys and historical aerial photographs. HRT surveys were collected during three consecutive summers (2017–2019), using uncrewed aerial vehicle (UAV) and terrestrial laser scanning (TLS) measurements. To date, very few studies exist that use HRT methods on talus slopes, especially to the extent of our study area (2 km²). Data acquisition from ground control and in situ field observations is challenging on a talus slope due to the steep terrain (30–37°) and high surface roughness. This results in a poor spatial distribution of ground control points (GCPs), causing unwanted deformation of up to 2 m in the gathered UAV-derived HRT data. The co-alignment of UAV imagery from different survey dates improved this deformation significantly, as validated by the TLS data. Sediment transfer is dominated by small-scale but widespread snow push processes. Pre-existing debris flow channels are prone to erosion and redeposition of material within the channel. A debris flow event of high magnitude occurred in the summer of 2019, as a result of several convective thunderstorms. While low-magnitude (<5,000 m³) debris flow events are frequent throughout the historical record with a return period of 10–20 years, this 2019 event exceeded all historical debris flow events since 1946 in both extent and volume. Future climate predictions show an increase of such intense precipitation events in the region, potentially altering the frequency of debris flows in the study area and changing the dominant geomorphic process which are active on such talus slopes. © 2020 John Wiley & Sons, Ltd.  相似文献